Công ty TNHH TM-DV Lâm Gia Phú là đại lý chính thức phân phối van GEMÜ tại Việt Nam
Địa chỉ: 1389/7 Phan Văn Trị, Phường 10, Quận Gò Vấp, Tp.HCM
Tel: 08 3588 0828 Fax: 08 3588 0829
http://cokhicongnghiep.mov.mn/
http://cokhicongnghiep.mov.mn/
Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com
.jpg)
GEMÜ là một trong những nhà sản xuất hàng đầu của hệ thống van, đo lường và điều khiển, và là người lãnh đạo thị trường thế giới của các van cho các ứng dụng vô trùng trong các ngành công nghiệp dược phẩm và công nghệ sinh học. Vị trí này đã đạt được sau đầu tư toàn diện GEMÜ trong nghiên cứu và phát triển ứng dụng cụ thể, chiếm hơn 5% doanh thu của công ty.
Mức độ đổi mới gắn liền với vị trí - Đức được coi là một quốc gia trên toàn cầu của các kỹ sư. GEMÜ trên bảng xếp hạng của 1.000 nhà lãnh đạo thị trường toàn cầu Đức hàng đầu. GEMÜ trụ sở chính tại khu vực đó là nơi có mật độ cao nhất của các nhà lãnh đạo thị trường toàn cầu, khu vực Heilbronn-Franken tại Baden-Württemberg. Thành công quốc tế của GEMÜ chủ yếu dựa vào các doanh nghiệp và tinh thần tiên phong của Fritz Müller, người đã phát triển quá trình van nhựa đầu tiên của thế giới trong năm 1963 van điện từ điều khiển trực tiếp Đây là điểm khởi đầu cho nền tảng của GEMÜ năm đó.
Hãy liên hệ với công ty TNHH TM-DV Lâm Gia Phú để được hỗ trợ giá tốt nhất cùng với dịch vụ tư vấn và hỗ trợ lắp đặt miễn phí sản phẩm Van GEMÜ
Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com
| Gemu Vietnam | 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 554 | |
| Connection : Spigots EN ISO 1127 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 4.5 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 540 15D 1 37 5 1 1 (88051957) _ DN 15 mm |
| (540-15D-1-37-5-1-1 / 54015D137511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 540 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 25 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 554 | |
| Connection : Spigots EN ISO 1127 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 4.5 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | DN 10-20mm |
| 600 10M52 | |
| Description : GEMU Spare Working Diaphragm | |
| Diaphragm M : EPDM/PTFE | |
| XCKJ10511 | |
| DPS_20R Push-Pull force gauge | |
| The model 9800 is discontinued and is replaced by RX-20, see attached | |
| 1. BHI62ET-7.5 Induction Motor | |
| 2. BHI62E-7.5 Induction Motor | |
| 8.5868.1231.3112 | |
| D8.4C1.0600.6324.G321 | |
| Gemu Vietnam | GEMU |
| GEMU Spare Working Diaphragm | |
| EPDM/PTFE | |
| Part No. 600-010-M52 | |
| Gemu Vietnam | GEMU |
| GEMU Spare Working Diaphragm | |
| EPDM/PTFE | |
| Part No. 600-010-M52 | |
| Gemu Vietnam | GEMU Metal Globle Valve Type 514 & Electro Positioner Type 1435 |
| Description : GEMU 2/2 Way Metal Globle Valve Type 514 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408, cast stainless steel | |
| Diaphragm materia: PTFE | |
| Control Function : Normally Closed | |
| Control Pressure : 5.5 – 10 | |
| Working Pressure : Max. 10 bar | |
| Perm.Temp : 180 Deg.C | |
| Description : GEMU Electro Pneumatic Positioner Type 1435 | |
| Air Supply : Max. 6 bar | |
| Output Signal: 0-10V, optional 4-20mAA | |
| Input Signal : 0/4-20mA, 0-10V | |
| Voltage Supply : 24V DC | |
| Action : Single acting | |
| Explosion : Without explosion proof rating | |
| Version : Electro-pneumatic 4-20mA, 50 I/min | |
| Accessories : – Mounting Set with Travel Sensor Type 1445 & Air-Tubing Type 1440 | |
| - Air Filter Regulator B72G & Pressure Gauge 18-013-989 | |
| DN 50 mm 1 set 514 50D1 37 5 1 5 2061 (EDV.88250361) | |
| 1/ add on 1435000Z10001 (EDV, 88092764) | |
| 2/ add on 1445000Z10551705002 (EDV.88279098) Type: 1435 | |
| 3/ add on 1440000ZKS (EDV, 88255000) | |
| 4/ add on B72G-2BK-AL1-RMN | |
| 5/ add on 18-013-989 | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Action : Single Acting | |
| Air Supply : Max 6 bar | |
| Output Signal : 0-10V Input Signal : 0-20mA , 4-20mA , 0-10V | |
| Voltage : 24V DC | |
| Version : Electro-pneumatic 4-20mA, 90 l/min | |
| Part No: 1435000Z10002 | |
| Gemu Vietnam | Part No: 334 1M142541C1010010 |
| Description : GEMU Plastic Pilot Valve, Directly Controlled Type 334 | |
| Valve Size : DN 1mm | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body Materi | |
| a : PBT, Polybutylene terephthalate | |
| Seal Material : FPM | |
| Control Function : Normally Closed | |
| Voltage : 24V DC | |
| Gemu Vietnam | Part No: 610 12D1152 1 1/N |
| GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 610 | |
| Valve Size : DN 12mm | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body Materi | |
| a : PVC-U, grey | |
| Diaphragm Material : PTFE/EPDM | |
| Control Function : Normally Closed | |
| Gemu Vietnam | Part No: 1215000Z1546 |
| GEMU Electrical Position Indicator ATEX | |
| Feedback : Single pole double throw contact,microswitches | |
| Gemu Vietnam | 514 65D1.37.5-1-2 2061 (88047034) |
| (Valve Normally closed, | |
| Type: 514 65D 137 51 2 2061, | |
| PST:5.5-8bar,PB=7bar,180oC,) | |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 (88011313) |
| (Valve Normally closed, | |
| Type:514 50D 137 51 2 2061 ,88011313, | |
| PST:5.5-8bar,PB=7bar,180oC, DN50,PN25) | |
| Gemu Vietnam | DN 65 mm 514 65D1.37.5-1-2 2061 (88047034) |
| + Positioner 1436000Z1SA010001050 (88257690) | |
| + Mounting Kit 1436S01Z551705000 (88298041) | |
| + Plastic Tubing 1440 000ZKS (88255000) | |
| + Cable Plug 1219 000Z0000DW10M0M125A (88210911) | |
| ****** Full sets | |
| (Valve Inox chu Y DN65 PN25, | |
| Type:514 65D 137 51 2 2061+1436, | |
| PB=7bar,PST:5.5-8bar,180oC | |
| Control valve | |
| Model: 1436000Z1SA010001050,24VDC, | |
| 0/4-20mA,Single:100L/min,I-DE-88257690-02-3565585) | |
| Gemu Vietnam | Solenoid Valve |
| 0324 2M147441C1010210 | |
| (EDV:88322110) | |
| (Model : 324-1) | |
| Gemu Vietnam | Diaphragm Valve: |
| 695 20D39.8.14.1.1/N | |
| (EDV:88075164) | |
| (Model : 695 20D398141 | |
| PST, 5.5 – 7 bar | |
| I-DE-88075164-00-2873583) | |
| Gemu Vietnam | 540 15D 1 37 5 1 1 (88051957) _ DN 15 mm |
| (540-15D-1-37-5-1-1 / 54015D137511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 540 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 25 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 554 | |
| Connection : Spigots EN ISO 1127 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 4.5 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 540 15D 1 37 5 1 1 (88051957) _ DN 15 mm |
| (540-15D-1-37-5-1-1 / 54015D137511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 540 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 25 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 554 | |
| Connection : Spigots EN ISO 1127 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 4.5 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | 554 40D 60 37 5 1 1 (88211296) _ DN 40 mm |
| (554-40D-60-37-5-1-1 / 55440D6037511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 554 | |
| Connection : Spigots EN ISO 1127 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 4.5 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | GEMU Spare Actuator Type 9625 |
| (actuator come with optical position indicator) | |
| DN 10-20 | |
| 9625 10D 1 1/N | |
| (EDV: 88027274) | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Action : Single Acting | |
| Air Supply : Max 6 bar | |
| Output Signal : 0-10V Input Signal : 0-20mA , 4-20mA , 0-10V | |
| Voltage : 24V DC | |
| Version : Electro-pneumatic 4-20mA, 90 l/min | |
| Part No: 1435000Z10002 | |
| Gemu Vietnam | Part No: 334 1M142541C1010010 |
| Description : GEMU Plastic Pilot Valve, Directly Controlled Type 334 | |
| Valve Size : DN 1mm | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body Materi | |
| a : PBT, Polybutylene terephthalate | |
| Seal Material : FPM | |
| Control Function : Normally Closed | |
| Voltage : 24V DC | |
| Gemu Vietnam | Part No: 610 12D1152 1 1/N |
| GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 610 | |
| Valve Size : DN 12mm | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body Materi | |
| a : PVC-U, grey | |
| Diaphragm Material : PTFE/EPDM | |
| Control Function : Normally Closed | |
| Gemu Vietnam | Part No: 1215000Z1546 |
| GEMU Electrical Position Indicator ATEX | |
| Feedback : Single pole double throw contact,microswitches | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Action : Single Acting | |
| Air Supply : Max 6 bar | |
| Output Signal : 0-10V , optional 4-20mA | |
| Input Signal : 0-20mA , 4-20mA , 0-10V | |
| Voltage : 24V DC | |
| Version : Electro-pneumatic 4-20mA, 50 l/min | |
| Part No. 1435000Z10001 (1435 000 Z 100 01) | |
| EDV No. 88092764 | |
| Note: without Mounting Kit | |
| *** After clarified, this is pneumatic butterfly valve equipped with electro positioner and direct mounted. | |
| S/N 1) EDV No: Description: 88039444 WZ 3.1B Material Analysis Inspection Certificate Net Unit PriceEURO 70.00 per order item | |
| 2) 88094384 WZ 3.1B Measurement of surface finishing Allocation of the surface finish certificate to the valve bodies by clear numbering of bodies EURO 35.00 per valve | |
| 3) 88039443 WZ 2.2 Pressure Test General confirmation of pressure test with max. 6 bar air. Only possible with assembled valve EURO 15.00 per order item | |
| 4) 88079146 WZ 2.2 Measurement of surface finishing General confirmation that surface finish specifications have been adhered to and indication of tst conditions EURO 20.00 per order item | |
| 5) Documentation available upon request: Letter of Conformity F.O.C | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner Type 1435 |
| PartNo. 1435 000Z10001 | |
| EDV No. 88092764 | |
| Description : GEMU Electro Pneumatic Positioner Type 1435 | |
| Air Supply : Max. 6 bar | |
| Output Signal: 0-10V, optional 4-20mAA | |
| Input Signal : 0/4-20mA, 0-10V | |
| Voltage Supply : 24V DC | |
| Action : Single acting | |
| Gemu Vietnam | DN 10-20mm |
| 600 10M52 | |
| Description : GEMU Spare Working Diaphragm | |
| Diaphragm M : EPDM/PTFE | |
| XCKJ10511 | |
| DPS_20R Push-Pull force gauge | |
| The model 9800 is discontinued and is replaced by RX-20, see attached | |
| 1. BHI62ET-7.5 Induction Motor | |
| 2. BHI62E-7.5 Induction Motor | |
| 8.5868.1231.3112 | |
| D8.4C1.0600.6324.G321 | |
| Gemu Vietnam | 673 25D1834170S1500 |
| DN 25mm | |
| Description : GEMU Metal Diaphragm Valve, Manually Operated | |
| Conneciton : Spigots DIN 11850, series 3 | |
| Body Material : 1.4435 (316L) Stainless Steel | |
| Diaphragm Material : EPDM | |
| Control Function : Manually Operated | |
| Surface Finishing : Ra <= 6.3 μm blasted internal/external | |
| Working Pressure : Max 10 bar | |
| Temperature : Max 150°C | |
| Gemu Vietnam | 673 32D1834170S1500 |
| DN 32mm | |
| Description : GEMU Metal Diaphragm Valve, Manually Operated | |
| Conneciton : Spigots DIN 11850, series 3 | |
| Body Material : 1.4435 (316L) Stainless Steel | |
| Diaphragm Material : EPDM | |
| Control Function : Manually Operated | |
| Surface Finishing : Ra <= 6.3 μm blasted internal/external | |
| Working Pressure : Max 10 bar | |
| Temperature : Max 150°C | |
| Gemu Vietnam | 540 15D 1 37 5 1 1 (88051957) _ DN 15 mm |
| (540-15D-1-37-5-1-1 / 54015D137511) | |
| Description : GEMU 2/2 Way Metal Globe Valve Type 540 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408 Stainless Steel | |
| Diaphragm material : PTFE | |
| Control Function : Normally Closed | |
| Working Pressure : Max 25 bar | |
| Woking Temperatur : Max 180°C | |
| Gemu Vietnam | GEMU Metal Solenoid Valve (NAMUR) |
| Connection : Threaded sockets G 1/4 | |
| Body Material : Aluminium (AI) | |
| Seal Material : Perbunan (NBR) | |
| Voltage : 24V DC | |
| Working Pressure : 2 - 8 bar | |
| Working Temperatur : -10°C to +50°C | |
| Valve Size: DN 6mm | |
| Type: 8506 | |
| Part No. 8506 6M11421 24V DC (8506-6-M-1-14-2-1-24) | |
| EDV: 88046910 | |
| Gemu Vietnam | 855 15 D 7 21 14 1 21 60 |
| Media: H2O/Water at 20 Deg.C | |
| Range: 5 - 60 L/hr | |
| (EDV: 88010205) | |
| 855 15 D 7 21 14 1 25 320 | |
| Media: H2O/Water at 20 Deg.C | |
| Range: 30 - 320 L/hr | |
| (EDV: 88010209) | |
| 855 25 D 7 21 14 1 44 1000 | |
| Media: H2O/Water at 20 Deg.C | |
| Range: 100 - 1000 L/hr | |
| (EDV: 88003059) | |
| 805 32 D 7 21 14 1 63 2500 | |
| 805 32D 7 21 14 1 63 2500 (EDV.8804 378.00 378.00 | |
| Media: H2O/Water at 20 Deg.C | |
| Range: 200 - 2500 L/hr | |
| (EDV: 88044971) | |
| Gemu Vietnam | 3020 25D7 1 4 P 523 3600 |
| 100% origin Germany | (EDV. 88268887) |
| Description : GEMU Flow Transmitters , Turbine Type 3020 | |
| Connection : Union end with DIN solent cement dockets | |
| Material : Housing PVC-U grey, inner parts PVDF | |
| DN 25mm | |
| Seal Material : FPM | |
| Voltage : 24V DC | |
| Transcuder : Analogue output4-20mA | |
| Flow Rate : max. flow 3600/l/h | |
| Gemu Vietnam | 687 25D17341311/N-1502 (88048159) |
| Description : GEMU 2/2 Way Metal Diaphragm Valve,Pneumatically Operated 687 | |
| Connection : Spigots DIN 11850, Series 2 | |
| Body material : 1.4435 Investment casting (316L) | |
| Diaphragm material : EPDM - Max 150°C | |
| Control Function : Normally Closed | |
| Surface Finishing : 0.8 μm mechanically polished internal, blasted external | |
| Working Pressure : Max. 10 bar | |
| Working Temperature : Max. 150°C | |
| Gemu Vietnam | 687 25D17341311/N-1502 (88048159) |
| Description : GEMU 2/2 Way Metal Diaphragm Valve, Pneumatically Operated 625 | |
| Connection : Spigots DIN 11850, Series 2 | |
| Body material : 1.4435 Investment casting (316L) | |
| Diaphragm material : EPDM - Max 150°C | |
| Control Function : Normally Closed | |
| Surface Finishing : 6.3 μm blasted internal/external | |
| Working Pressure : Max. 6 bar | |
| Working Temperature : Max. 150°C | |
| Gemu Vietnam | GEMU Spare Working Diaphragm |
| 600 25M13 (88037767) | |
| ** (For Valve Size DN15 to DN25) | |
| Gemu Vietnam | GEMU Spare Working Diaphragm |
| 600 10M13 (88037819) | |
| ** (For Valve Size DN10 to DN2) | |
| Gemu Vietnam | GEMU |
| GEMU Spare Working Diaphragm | |
| EPDM/PTFE | |
| Part No. 600-010-M52 | |
| Gemu Vietnam | GEMU Metal Globle Valve Type 514 & Electro Positioner Type 1435 |
| Description : GEMU 2/2 Way Metal Globle Valve Type 514 | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : 1.4408, cast stainless steel | |
| Diaphragm materia: PTFE | |
| Control Function : Normally Closed | |
| Control Pressure : 5.5 - 10 | |
| Working Pressure : Max. 10 bar | |
| Perm.Temp : 180 Deg.C | |
| Description : GEMU Electro Pneumatic Positioner Type 1435 | |
| Air Supply : Max. 6 bar | |
| Output Signal: 0-10V, optional 4-20mAA | |
| Input Signal : 0/4-20mA, 0-10V | |
| Voltage Supply : 24V DC | |
| Action : Single acting | |
| Explosion : Without explosion proof rating | |
| Version : Electro-pneumatic 4-20mA, 50 I/min | |
| Accessories : - Mounting Set with Travel Sensor Type1445 & Air-Tubing Type 1440 | |
| - Air Filter Regulator B72G & Pressure Gauge 18-013-989 | |
| DN 50 mm 1 set 514 50D1 37 5 1 5 2061(EDV.88250361) | |
| 1/ add on 1435000Z10001 (EDV, 88092764) | |
| 2/ add on 1445000Z10551705002 (EDV.88279098) Type: 1435 | |
| 3/ add on 1440000ZKS (EDV, 88255000) | |
| 4/ add on B72G-2BK-AL1-RMN | |
| 5/ add on 18-013-989 | |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 (88011313) |
| (Valve Normally closed, | |
| Type:514 50D 137 51 2 2061 ,88011313, | |
| PST:5.5-8bar,PB=7bar,180oC, DN50,PN25) | |
| Gemu Vietnam | DN 65 mm 514 65D1.37.5-1-2 2061 (88047034) |
| + Positioner 1436000Z1SA010001050 (88257690) | |
| + Mounting Kit 1436S01Z551705000 (88298041) | |
| + Plastic Tubing 1440 000ZKS (88255000) | |
| + Cable Plug 1219 000Z0000DW10M0M125A (88210911) | |
| ****** Full sets | |
| (Valve Inox chu Y DN65 PN25, | |
| Type:514 65D 137 51 2 2061+1436, | |
| PB=7bar,PST:5.5-8bar,180oC | |
| Control valve | |
| Model: 1436000Z1SA010001050,24VDC, | |
| 0/4-20mA,Single:100L/min,I-DE-88257690-02-3565585) | |
| 0324 2M147441C1010210 | |
| (EDV:88322110) | |
| (Model : 324-1) | |
| Gemu Vietnam | Diaphragm Valve: |
| 695 20D39.8.14.1.1/N | |
| (EDV:88075164) | |
| (Model : 695 20D398141 | |
| PST, 5.5 - 7 bar | |
| I-DE-88075164-00-2873583) | |
| Gemu Vietnam | DN 25mm |
| 807 25D7.21.14.1.55.1600 | |
| (EDV, 88044984) | |
| Description : GEMU Plastic Flowmeter Type 807 | |
| Float Material : 1.4571 Stainless Steel | |
| Tube Conneciton : Union ends with DIN insert (socket) | |
| Tube Material : PA, Polyamide transparent | |
| O-Ring Material : EPDM | |
| Connection Material : PVC-U, grey | |
| Media : Water at 20°C | |
| Range : 150 - 1600 l/h | |
| 807 25D 72114 155 1600 | |
| Gemu Vietnam | DN 50mm |
| 807 50D33.21.14.1.73.10000 | |
| (EDV, 88036558) | |
| Description : GEMU Plastic Flowmeter Type 807 | |
| Float Material : 1.4571 Stainless Steel | |
| Tube Conneciton : Union ends with INCH insert (socket) | |
| Tube Mater : PA, Polyamide transparent | |
| O-Ring Material : EPDM | |
| Connection Material : PVC-U, grey | |
| Media : Water at 20°C | |
| Range : 1000 - 10000 l/h | |
| 807 50D 332114 173 1000 | |
| Gemu Vietnam | Description : GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Action : Single Acting | |
| Air Supply : Max 6 bar | |
| Output Signal : 0-10V, optional 4-20mA | |
| Input Signal : 0/4-20mA, 0-10V | |
| Voltage : 24V DC | |
| 1435000Z30201 (Electro-pneumatic 4-0mA, 50 I/min) | |
| (Positioner 1435000Z10001, 24VDC 0/4 20W/7.2W ( van cap hoi GEMU Fritz- Mueller - Str 6-8, D-74653 ingelfinger , 51425D19511 + 1435. PST:6bar, 180oC)) | |
| Gemu Vietnam | (61220D59.34.17.0.S.1500) |
| 612 20D59.34.17.0.S.1500 | |
| Description : GEMU Metal Diaphragm Valve, Manually Operated | |
| Conneciton : Spigots ASME BPE | |
| Body Material : 1.4435 (316L) Stainless Steel | |
| Diaphragm Material : EPDM | |
| Control Function : Manually Operated | |
| Surface Finishing : Ra <= 6.3 μm blasted internal/external | |
| Working Pressure : Max 10 bar | |
| Temperature : Max 150°C | |
| Gemu Vietnam | 600 32D78 71 14 1 3/N |
| Gemu Diaphragm Valve Plastic (60032D78711413/N) | |
| Gemu Vietnam | 1230000ZA021031101101 |
| Gemu Intelligent Positioner Indicator | |
| Gemu Vietnam | 1435000Z10002 (1435000Z10002-0 not correct) |
| Gemu Intelligent Positioner 1435 _ future replace by 1436 | |
| Gemu Vietnam | 600 32D78 71 14 1 3/N |
| Gemu Diaphragm Valve Plastic (not correct 60032D78711413/N) | |
| Option 1 | Mains Charger (230/115V) with European type plug fitted_ C-251HVE |
| Option 2 | Mains Charger (230/115V) with UK type 3 pin plug fitted _C-251HV |
| Option 3 | Low Voltage (12/24V) Vehicle Charger _ C-251LV |
| Gemu Vietnam | 667 40D33.1.14.2 |
| (EDV,88065232)_ DN 40mm | |
| Description : GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 667 | |
| Conneciton : Union ends with inch insert (socket) | |
| Body Material : PVC-U, grey | |
| Diaphragm Material : EPDM | |
| Control Function : Normally Open | |
| Working Pressure : Max. 10 bar | |
| Temperature : 5°C to 60°C | |
| Gemu Vietnam | 667 25D33.1.14.2 |
| (EDV,88042596)_ DN 25mm | |
| Description : GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 667 | |
| Conneciton : Union ends with inch insert (socket) | |
| Body Material : PVC-U, grey | |
| Diaphragm Material : EPDM | |
| Control Function : Normally Open | |
| Working Pressure : Max. 10 bar | |
| Temperature : 5°C to 60°C | |
| Gemu Vietnam | * SOLENOID : |
| Model : 324-1 | |
| * Actuator : | |
| Model : 695 20D398141 | |
| PST, 5.5 - 7 bar | |
| I-DE-88075164-00-2873583 | |
| Gemu Vietnam | 514 65D1.37.5-1-2 2061 (88047034) |
| (Valve Normally closed, | |
| Type: 514 65D 137 51 2 2061, | |
| PST:5.5-8bar,PB=7bar,180oC,) | |
| Gemu Vietnam | 640 25D 1 37 12 1 1 (EDV 88052017) |
| (64025D1371211 - 640 25D137121 1) | |
| DN 25mm | |
| Description : GEMU Metal Diaphragm Valve, Pneumatically Operated | |
| Conneciton : G 1" | |
| Body Materia : 1.4408 Stainless Steel | |
| Diaphragm Material : EPDM | |
| Control Function : Noramlly Closed | |
| Working Pressure : Max 10 bar | |
| Temperature : Max 130°C | |
| Gemu Vietnam | GEMU Metal Diaphragm Valve, Pneumatically Operated Type 615 |
| 615 15D60.34.52.1.1/N.1508 | |
| DN 15mm | |
| (615-15D-60-34-52-1-1/N-1508) | |
| Description : GEMU Metal Diaphragm Valve, Pneumatically Operated | |
| Conneciton : Spigots DIN std | |
| Body Material : 1.4435 (316L) Stainless Steel | |
| Diaphragm Material : PTFE/EPDM | |
| Control Function : Normally Closed | |
| Surface Finishing : Ra <= 0.6 electropolished internal/external | |
| Working Pressure : Max 6 bar | |
| Temperature : Max 150°C | |
| Gemu Vietnam | WZ 3.1B Material Analysis Inspection Certificate |
| 88039444 | |
| Gemu Vietnam | WZ 2.2 Pressure Test |
| General confirmation of pressure test with | |
| max. 6 bar air. Only possible with assembled valve | |
| 88039443 | |
| Gemu Vietnam | WZ 2.2 Measurement of surface finishing |
| General confirmation that surface finish | |
| specifications have been adhered to and | |
| indication of tst conditions | |
| 88079146 | |
| Gemu Vietnam | VEGA Germany |
| VEGASON 64 | |
| code: SON64.XXAEPVDMXX | |
| Liquids: 1..25m. Solid : | |
| Gemu Vietnam | 600 10M52 (88026752) _ 60010M52 |
| Description : GEMU Spare Working Diaphragm | |
| Diaphragm Material : PTFE/EPDM | |
| For Valve Size: DN 10-15 | |
| (Valve: 61515D6034523 (size) =15 | |
| Diaphragm material = PTFE/EPDM | |
| Diaphragm material code =52) | |
| Gemu Vietnam | 417 50D7.1.14.0 |
| (EDV, 88012869) | |
| DN 50mm | |
| 41750D71140 | |
| Gemu Vietnam | GEMU Plastic Pilot Valve, Directly Controlled Type 0322 |
| 0322 2M17441C1010010 | |
| (EDV, 88318741) | |
| DN 2mm | |
| Description : 3/2 way plastic pilot valve, directly controlled | |
| Connection : Threaded sockets DIN ISO 228 | |
| Body material : PA, Polyamide | |
| Seal Material : FPM | |
| Control Function : Normally Closed | |
| Voltage : 24V DC | |
| Electrical Connection : Plug with cable socket, without cable | |
| Working Pressure : Max. 10 ba | |
| Note: confirm lai type cua valve truoc khi dat hang | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner Type 1435 |
| PartNo. 1435000Z30201 | |
| (4-20mA actual value output) | |
| (Electro-pneumatic 4-0mA, 50 I/min) | |
| (100% exact for this PN.) | |
| EDV No. 88203371 instead of 88092764 | |
| Description : GEMU Electro Pneumatic Positioner Type 1435 | |
| Air Supply : Max. 6 bar | |
| Output Signal: 0-10V, optional 4-20mAA | |
| Input Signal : 0/4-20mA, 0-10V | |
| Voltage Supply : 24V DC | |
| Action : Single acting | |
| (without Mounting Kit) | |
| Gemu Vietnam | 817 20D33 21 14 146 250 |
| Media : Water at 20°C | |
| Range : 20 - 250 L/hr | |
| Description : GEMU Plastic Flowmeter Type 817 | |
| Tube Conneciton : Union ends with inch insert (socket) | |
| Tube Materi : PA, Polyamide transparent | |
| O-Ring Material : EPDM | |
| Connection Material : PVC-U, grey | |
| Media : Water at 20°C | |
| * (For more details please check attached data sheet) | |
| Gemu Vietnam | 817 20D33 21 14 148 640 |
| Media : Water at 20°C | |
| Range : 60 - 640 L/hr | |
| Description : GEMU Plastic Flowmeter Type 817 | |
| Tube Conneciton : Union ends with inch insert (socket) | |
| Tube Materi : PA, Polyamide transparent | |
| O-Ring Material : EPDM | |
| Connection Material : PVC-U, grey | |
| Media : Water at 20°C | |
| * (For more details please check attached data sheet) | |
| Gemu Vietnam Description : Gemu Vietnam Spare Working Diaphragm | 600 25M52 |
| Diaphragm Material : PTFE/EPDM | (EDV: 88015145) |
| DN15-25mm | |
| Gemu Vietnam Gemu Vietnam Spare Working Diaphragm | 600 25M13 |
| Diaphragm Material : EPDM | (EDV: 88037767) |
| DN15-25mm | |
| Gentos | SP-032 |
| GESTRA Temperature Sensors | TRG 5-54 |
| Gemu Vietnam | 1435000Z10001 |
| -88092764 | |
| Gemu Vietnam | 1435000Z10002 |
| -88096051 | |
| Gemu Vietnam | 1252000Z00000 |
| (EDV: 88029063) | |
| Gemu Vietnam | 1251000Z00000 |
| (EDV: 88029062) | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Type: 52 4D1151 24DC U (EDV:88000238) |
| Gemu Vietnam | 554 15D31C151 0 (EDV: 88320057) |
| Equip with 1300000Z04 (EDV: 88004333) | |
| Gemu Vietnam | SC0300U 6 F07F10NS22A 126Nm 206Nm 6bar SU30KD0 |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 |
| (EDV: 88011313) | |
| DN 50mm | |
| Equip with: 1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 520 80D39.8.5.1.3/3 |
| (EDV: 88031662) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 9520 80Z8.5.1.3/3 |
| (EDV: 88240731) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 512 50D39.8.5.1.2 |
| (EDV: 88032056) | |
| DN 50mm | |
| Equip with:1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 9512 50Z8.5.1.2 |
| (EDV: 88027458) | |
| DN 50mm | |
| Equip with: 1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | Type: 52 4D1151 24DC U (EDV:88000238) |
| Gemu Vietnam | 334 1M182541C1010010 |
| (EDV: 88045712) | |
| DN 1mm | |
| Gemu Vietnam | 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC | |
| Gemu Vietnam | 88214090 8258 40D 112 21 24 DC |
| Gemu Vietnam | 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC | |
| Gemu Vietnam | 687 25D373413 3 1/N 1 |
| (EDV: 88290803) | |
| DN 25mm | |
| Equip with: | |
| 1300000Z13 | |
| (EDV: 88004337) | |
| Gemu Vietnam | 600 25M13 |
| (EDV: 88037767) | |
| DN 15-25mm | |
| Gemu Vietnam | 8258 32D11221 230 50 |
| (EDV: 88204157) | |
| DN 32mm | |
| Gemu Vietnam | 514 32D13751 4 |
| (EDV# 88012582) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C10 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
| Gemu Vietnam | 0324 2M1474 41L40 |
| Voltage: 230V AC (50/60Hz) | |
| (EDV# 88318769) | |
| DN 2mm | |
| Gemu Vietnam | 514 50D13751 4 |
| (EDV: 88012583) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C10 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
Không có nhận xét nào:
Đăng nhận xét