GEMU Electro-Pneumatic Positioner Type 1435 - Gemu Valve Việt Nam Distributor

Công ty TNHH TM-DV Lâm Gia Phú là đại lý chính thức phân phối van GEMÜ tại Việt Nam

Địa chỉ: 1389/7 Phan Văn Trị, Phường 10, Quận Gò Vấp, Tp.HCM

Tel: 08 3588 0828  Fax: 08 3588 0829
http://cokhicongnghiep.mov.mn/

Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com

GEMÜ là một trong những nhà sản xuất hàng đầu của hệ thống van, đo lường và điều khiển, và là người lãnh đạo thị trường thế giới của các van cho các ứng dụng vô trùng trong các ngành công nghiệp dược phẩm và công nghệ sinh học. Vị trí này đã đạt được sau đầu tư toàn diện GEMÜ trong nghiên cứu và phát triển ứng dụng cụ thể, chiếm hơn 5% doanh thu của công ty.

Mức độ đổi mới gắn liền với vị trí - Đức được coi là một quốc gia trên toàn cầu của các kỹ sư. GEMÜ trên bảng xếp hạng của 1.000 nhà lãnh đạo thị trường toàn cầu Đức hàng đầu. GEMÜ trụ sở chính tại khu vực đó là nơi có mật độ cao nhất của các nhà lãnh đạo thị trường toàn cầu, khu vực Heilbronn-Franken tại Baden-Württemberg. Thành công quốc tế của GEMÜ chủ yếu dựa vào các doanh nghiệp và tinh thần tiên phong của Fritz Müller, người đã phát triển quá trình van nhựa đầu tiên của thế giới trong năm 1963 van điện từ điều khiển trực tiếp Đây là điểm khởi đầu cho nền tảng của GEMÜ năm đó.

Aseptic Diaphragm valves

Single-Use Diaphragm Valves

Diaphragm Valves plastic

Butterfly Valves

Globe Valves

Control Valves

Solenoid Valves

Pilot Valves

Ball Valves

Sensors and Display units

Actuators

Accessories

 
 

 

Hãy liên hệ với công ty TNHH TM-DV Lâm Gia Phú để được hỗ trợ giá tốt nhất cùng với dịch vụ tư vấn và hỗ trợ lắp đặt miễn phí sản phẩm Van GEMÜ

Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com

Gemu Vietnam	0324 2M1474 41C1010210
	Voltage: 24V DC
	(EDV# 88322110)
	DN 2mm
Gemu Vietnam	0324 2M1474 41L4010210
	Voltage: 230V AC (50/60Hz)
	(EDV# 88318769)
	DN 2mm
Gemu Vietnam	688 25D87405E11V1 1502
	DN 25mm
Gemu Vietnam	8258-32-D-31-37-2-1-24-DC
Gemu Vietnam	8253 25D 31 37 2 1 24DC
	DN 25mm
Gemu Vietnam	DN 50mm
	667 50D71145
	(EDV: 88050362)
Gemu Vietnam	R690 50D 7 1 14 2 HDN
	(EDV: 88365093)
	DN 50mm
Gemu Vietnam	1230000ZA001031101101
Gemu Vietnam	DN15-25
	600 25M13 (EDV: 88037767)
	Diaphragm Material : EPDM
Gemu Vietnam	Part no:1435000Z30201
Gemu Vietnam	Part no:1435000Z30201
Gemu Vietnam	615 15D60345231/N 1509
	(EDV: 88209013)
Gemu Vietnam	8253 25D13721 230 50/60
	(EDV: 88299445)
Gemu Vietnam	DN 10-20mm
Gemu Vietnam	855 15 D 7 21 14 1 21 60
Gemu Vietnam	3020 25D7 1 4 P 523 3600
Gemu Vietnam	687 25D17341311/N-1502 (88048159)
Gemu Vietnam	687 25D17341311/N-1502 (88048159)
Gemu Vietnam	GEMU Spare Working Diaphragm
Gemu Vietnam	GEMU Spare Working Diaphragm
Gemu Vietnam	GEMU
Gemu Vietnam	GEMU
Gemu Vietnam	GEMU Metal Globle Valve Type 514 & Electro Positioner Type 1435
Gemu Vietnam	GEMU Electro-Pneumatic Positioner Type 1435
Gemu Vietnam	GEMU Electro-Pneumatic Positioner Type 1435
Gemu Vietnam	817 20D33 21 14 146 250
Gemu Vietnam	817 20D33 21 14 148 640
Gemu Vietnam	640 25D 1 37 12 1 1 (EDV 88052017)
Gemu Vietnam	600 10M52 (88026752) _ 60010M52
Gemu Vietnam	600 10M52 (88026752) _ 60010M52
Gemu Vietnam	(61220D59.34.17.0.S.1500)
Gemu Vietnam	GEMU Metal Diaphragm Valve, Pneumatically Operated Type 615
Gemu Vietnam	WZ 3.1B Material Analysis Inspection Certificate
Gemu Vietnam	WZ 2.2 Pressure Test
Gemu Vietnam	WZ 2.2 Measurement of surface finishing
Gemu Vietnam	VEGA Germany
Gemu Vietnam	600 32D78 71 14 1 3/N
Gemu Vietnam	1230000ZA021031101101
Gemu Vietnam	1435000Z10002 (1435000Z10002-0 not correct)
Gemu Vietnam	600 32D78 71 14 1 3/N
Gemu Vietnam	1230000ZA021031101101
Gemu Vietnam	1435000Z10002 (1435000Z10002-0 not correct)
Gemu Vietnam	667 40D33.1.14.2
Gemu Vietnam	667 25D33.1.14.2
Gemu Vietnam	* SOLENOID :
Gemu Vietnam	514 65D1.37.5-1-2 2061 (88047034)
Gemu Vietnam	514 50D1.37.5-1-2 2061 (88011313)
Gemu Vietnam	DN 65 mm 514 65D1.37.5-1-2 2061 (88047034)
Gemu Vietnam	Solenoid Valve
Gemu Vietnam	Diaphragm Valve:
Gemu Vietnam	DN 25mm
Gemu Vietnam	DN 50mm
Gemu Vietnam	Description : GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit)
Gemu Vietnam	GEMU Spare Actuator Type 9625
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	417 50D7.1.14.0
Gemu Vietnam	GEMU Plastic Pilot Valve, Directly Controlled Type 0322
Gemu Vietnam	GEMU Spare Actuator Type 9625
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Spare Actuator Type 9625
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	GEMU Metal Solenoid Valve (NAMUR)
Gemu Vietnam	673 25D1834170S1500
Gemu Vietnam	673 32D1834170S1500
Gemu Vietnam	GEMU Spare Actuator Type 9625
Gemu Vietnam	GEMU Spare Actuator Type 9625
Gemu Vietnam	600 10M52
	(EDV: 8826752)
	DN10-20mm
Gemu Vietnam	600 10M13
	(EDV: 88037819)
	DN10-20mm
Gemu Vietnam	Description:GEMU Electro-Pneumatic Positioner Type 1435 1435000Z10001
	(Without explosion proof rating) (EDV: 88092764)
	Housing Material:Aluminium coated
	Air Supply:Max. 6 bar
	Voltage:24V DC
	Version:Electro-pneumatic 4-20mA, 50 l/min
	Function:Single Acting
Gemu Vietnam	Description:GEMU Plastic Diaphragm Valve, Pneumatically Operated
	Connection:Threaded Sockets DIN ISO 228
	Body material:PVC 610 12D1.1.52.1 1/N
	Diaphragm material:PTFE/EPDM
	Control Function:Normally Closed
	Working Pressure:Max. 6 bar
Gemu Vietnam	Description:GEMU Electrical Position indicator ATEX for 610 12D 1215000Z1546
	Feedback:Single pole double throw contact, microswitches (EDV: 88046211)
Màng van	600 M52  GEMU
Gemu Vietnam	Flow Metter
	AN: 88060143
	807R65D 72114 17720000
	(807 65 D 7 21 14 1 77 20000)
Gemu Vietnam	Flow Metter
	AN: 88002768
	805R25D 72214 152 210
	(805 25 D 7 21 14 1 52 210)
Gemu Vietnam	Flow Metter
	AN: 88002750
	805R25D 72114 154 130
	(805 25 D 7 21 14 1 54 130)
Gemu Vietnam	Flow Metter
	AN: 88220345
	807R25D 72114 152 65
	(807 25 D 7 21 14 1 52 65)
Gemu Vietnam	Flow Metter
	AN: 88044970
	805R25D 72114 155 1000
	(805 25 D 7 21 14 1 55 100)
Gemu Vietnam	Flow Metter
	AN: 88002862
	807R50D 72114 17310000
	(807 50 D 7 21 14 1 73 10000)
Gemu Vietnam	Flow Metter
	AN: 88035429
	807R40D 72114 167 2500
	(807 40 D 7 21 14 1 57 2500)
Gemu Vietnam	Flow Metter
	AN: 88010208
	855R15D 72114 124 250
	scale for medium water  20°C 20 – 250 l/h
	please check if it is right, the type you inquired was not totally clear.
	(855 15 D 7 21 14 1 24 200)
Gemu Vietnam	Flow Metter
	AN: 88010205
	855R15D 72114 121 60
	(855 15 D 7 21 14 1 21 60)
Gemu Vietnam	Flow Metter
	AN: 88014571
	857R20D 72114 134 1000
	(857 20 D 7 21 14 1 34 1000)
Gemu Vietnam	Flow Metter
	AN: 88035514
	855R15D 72214 123 130
	(855 15 D 7 21 14 1 23 130)
Gemu Vietnam	Code
Gemu Vietnam	618 15D1.12.4.C4.AP.6442 AO
	(EDV 88041354)
	DN 15mm
Gemu Vietnam	600 25M13
	(EDV: 88037767)
	DN15-25mm
Gemu Vietnam	600 25M52
	(EDV: 88015145)
	DN15-25mm
Gemu Vietnam	600 10M52
	(EDV: 8826752)
	DN10-20mm
Gemu Vietnam	600 10M13
	(EDV: 88037819)
	DN10-20mm
Gemu Vietnam	Part no: 1435000Z10002
	EDV No: 88096051
Gemu Vietnam	600 10M52
	(EDV: 88026752)
	size: DN10-20 (MG10)
Gemu Vietnam	600 25M5E
	(EDV: 88076835)
	DN 15-25 (MG25)
Gemu Vietnam	514 25D 19511 2061
	DN25mm
Gemu Vietnam	514 40D 19511 2061
	DN40mm
	Max. 4.5 bar
Gemu Vietnam	514 40D 19515 2061
	DN40mm
	Max. 9 bar
	4.0 - 8 bar
Gemu Vietnam	514 20D 19511 2061
	DN20mm
Gemu Vietnam	514 50D 19511 2061
	DN50mm
Gemu Vietnam	600 25D7871141 2/N
	(EDV: 88072224)
	DN 25mm
Gemu Vietnam	514 50D 1 37 5 1 5
	(EDV: 88039357)
	equipped
	1300000Z06
	(EDV: 88004334)
	DN 50mm
Gemu Vietnam	687 25D17341311/N-1502 (88048159)
	Description  :  GEMU 2/2 Way Metal Diaphragm Valve, Pneumatically Operated 625
	Connection  :  Spigots DIN 11850, Series 2
	Body material  :  1.4435 Investment casting (316L)
	Diaphragm material  :  EPDM – Max 150°C
	Control Function  :  Normally Closed
	Surface Finishing  :  6.3 μm blasted internal/external
	Working Pressure  :  Max. 6 bar
	Working Temperature :  Max. 150°C
Gemu Vietnam	GEMU Spare Working Diaphragm
	600 25M13 (88037767)
	** (For Valve Size DN15 to DN25)
Gemu Vietnam	GEMU Spare Working Diaphragm
	600 10M13 (88037819)
	** (For Valve Size DN10 to DN2)
Germany	Thông số:300V, 1X2X0.75
	Model:RE-2Y(ST)YV-FL
Gemu Vietnam	673 25D1834170S1500
	DN 25mm
	Description : GEMU Metal Diaphragm Valve, Manually Operated
	Conneciton : Spigots DIN 11850, series 3
	Body Material : 1.4435 (316L) Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Manually Operated
	Surface Finishing : Ra <= 6.3 μm blasted internal/external
	Working Pressure : Max 10 bar
	Temperature : Max 150°C
Gemu Vietnam	673 32D1834170S1500
	DN 32mm
	Description : GEMU Metal Diaphragm Valve, Manually Operated
	Conneciton : Spigots DIN 11850, series 3
	Body Material : 1.4435 (316L) Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Manually Operated
	Surface Finishing : Ra <= 6.3 μm blasted internal/external
	Working Pressure : Max 10 bar
	Temperature : Max 150°C
Gemu Vietnam	GEMU Electro-Pneumatic Positioner Type 1435
	PartNo. 1435000Z30201
	(4-20mA actual value output)
	(Electro-pneumatic 4-0mA, 50 I/min)
	(100% exact for this PN.)
	EDV No. 88203371 instead of 88092764
	Description : GEMU Electro Pneumatic Positioner Type 1435
	Air Supply : Max. 6 bar
	Output Signal: 0-10V, optional 4-20mAA
	Input Signal : 0/4-20mA, 0-10V
	Voltage Supply : 24V DC
	Action : Single acting
	(without Mounting Kit)
Gemu Vietnam	640 25D 1 37 12 1 1 (EDV 88052017)
	64025D1371211
	DN 25mm
	Description : GEMU Metal Diaphragm Valve, Pneumatically Operated
	Conneciton : G 1″
	Body Materia : 1.4408 Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Noramlly Closed
	Working Pressure : Max 10 bar
	Temperature : Max 130°C
Gemu Vietnam	640 8D 60 34 3A 1 00 1500 (EDV 88070519)
	6408D60343A1001500
	DN 8mm
	Description : GEMU Metal Diaphragm Valve, Pneumatically Operated
	Conneciton : Spigots EN ISO 1127
	Body Materia : 1.4435 (316L) Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Noramlly Closed
	Surface Fini : Ra ≤ 6,3μm blasted internal/external
	Working Pressure : Max 6 bar
	Temperature : Max 150°C
Gemu Vietnam	540 15D 1 37 5 1 1 (88051957) _ DN 15 mm
	(540-15D-1-37-5-1-1 / 54015D137511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 540
	Connection : Threaded sockets DIN ISO 228
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 25 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	855 25D33.3.14.1.44.900
	(EDV: 88282002)
Gemu Vietnam	855 25D33.21.14.1.44.260
	(EDV: 88036736)
Gemu Vietnam	Description:GEMU Electro-Pneumatic Positioner Type 1435 1435000Z10001
	(Without explosion proof rating) (EDV: 88092764)
	Housing Material:Aluminium coated
	Air Supply:Max. 6 bar
	Voltage:24V DC
	Version:Electro-pneumatic 4-20mA, 50 l/min
	Function:Single Acting
Gemu Vietnam	Description:GEMU Plastic Diaphragm Valve, Pneumatically Operated
	Connection:Threaded Sockets DIN ISO 228
	Body material:PVC 610 12D1.1.52.1 1/N
	Diaphragm material:PTFE/EPDM
	Control Function:Normally Closed
	Working Pressure:Max. 6 bar
Gemu Vietnam	Description:GEMU Electrical Position indicator ATEX for 610 12D 1215000Z1546
	Feedback:Single pole double throw contact, microswitches (EDV: 88046211)
Gemu Vietnam	GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit)
	Action  : Single Acting
	Air Supply  : Max 6 bar
	Output Signal : 0-10V , optional  4-20mA
	Input Signal : 0-20mA ,  4-20mA ,  0-10V
	Voltage : 24V DC
	Version : Electro-pneumatic 4-20mA, 50 l/min
	Part No. 1435000Z10001 (1435 000 Z 100 01)
	EDV No. 88092764
	Note: without Mounting Kit
	*** After clarified, this is pneumatic butterfly valve equipped with electro positioner and direct mounted.
	*** We offer you this positioner without the mounting kit.
	End-user can use back the existing mounting kit for this positioner
Gemu Vietnam	GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit)
	Action  : Single Acting
	Air Supply  : Max 6 bar
	Output Signal : 0-10V  Input Signal : 0-20mA ,  4-20mA ,  0-10V
	Voltage : 24V DC
	Version : Electro-pneumatic 4-20mA, 90 l/min
	Part No: 1435000Z10002
Gemu Vietnam	Part No: 334 1M142541C1010010
	Description : GEMU Plastic Pilot Valve, Directly Controlled Type 334
	Valve Size : DN 1mm
	Connection  : Threaded sockets DIN ISO 228
	Body Materi
	a : PBT, Polybutylene terephthalate
	Seal Material : FPM
	Control Function : Normally Closed
	Voltage : 24V DC
Gemu Vietnam	Part No: 610 12D1152 1 1/N
	GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 610
	Valve Size : DN 12mm
	Connection  : Threaded sockets DIN ISO 228
	Body Materi
	a : PVC-U, grey
	Diaphragm Material : PTFE/EPDM
	Control Function : Normally Closed
Gemu Vietnam	Part No: 1215000Z1546
	GEMU Electrical Position Indicator ATEX
	Feedback : Single pole double throw contact,microswitches
Gemu Vietnam	514 65D1.37.5-1-2 2061 (88047034)
	(Valve Normally closed,
	Type: 514 65D 137 51 2 2061,
	PST:5.5-8bar,PB=7bar,180oC,)
Gemu Vietnam	514 50D1.37.5-1-2 2061 (88011313)
	(Valve Normally closed,
	Type:514 50D 137 51 2 2061 ,88011313,
	PST:5.5-8bar,PB=7bar,180oC, DN50,PN25)
Gemu Vietnam	DN 65 mm 514 65D1.37.5-1-2 2061 (88047034)
	+ Positioner 1436000Z1SA010001050 (88257690)
	+ Mounting Kit 1436S01Z551705000 (88298041)
	+ Plastic Tubing 1440 000ZKS (88255000)
	+ Cable Plug 1219 000Z0000DW10M0M125A (88210911)
	****** Full sets
	(Valve Inox chu Y DN65 PN25,
	Type:514 65D 137 51 2 2061+1436,
	PB=7bar,PST:5.5-8bar,180oC
	Control valve
	Model: 1436000Z1SA010001050,24VDC,
	0/4-20mA,Single:100L/min,I-DE-88257690-02-3565585)
Gemu Vietnam	Solenoid Valve
	0324 2M147441C1010210
	(EDV:88322110)
	(Model : 324-1)
Gemu Vietnam	Diaphragm Valve:
	695 20D39.8.14.1.1/N
	(EDV:88075164)
	(Model : 695 20D398141
	PST, 5.5 – 7 bar
	I-DE-88075164-00-2873583)
Gemu Vietnam	540 15D 1 37 5 1 1 (88051957) _ DN 15 mm
	(540-15D-1-37-5-1-1 / 54015D137511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 540
	Connection : Threaded sockets DIN ISO 228
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 25 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	554 40D 60 37 5 1 1 (88211296) _ DN 40 mm
	(554-40D-60-37-5-1-1 / 55440D6037511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 554
	Connection : Spigots EN ISO 1127
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 4.5 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	540 15D 1 37 5 1 1 (88051957) _ DN 15 mm
	(540-15D-1-37-5-1-1 / 54015D137511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 540
	Connection : Threaded sockets DIN ISO 228
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 25 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	554 40D 60 37 5 1 1 (88211296) _ DN 40 mm
	(554-40D-60-37-5-1-1 / 55440D6037511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 554
	Connection : Spigots EN ISO 1127
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 4.5 bar
	Woking Temperatur : Max 180°C
	S/N 1)  EDV No: Description: 88039444 WZ 3.1B Material Analysis Inspection Certificate  Net Unit PriceEURO 70.00 per order item
	2)  88094384 WZ 3.1B Measurement of surface finishing Allocation of the surface finish certificate to the valve bodies by clear numbering of bodies  EURO 35.00 per valve
	3)  88039443 WZ 2.2 Pressure Test General confirmation of pressure test with max. 6 bar air. Only possible with assembled valve  EURO 15.00 per order item
	4)  88079146 WZ 2.2 Measurement of surface finishing General confirmation that surface finish specifications have been adhered to and indication of tst conditions  EURO 20.00 per order item
	5)  Documentation available upon request: Letter of Conformity  F.O.C
Gemu Vietnam	GEMU Electro-Pneumatic Positioner Type 1435
	PartNo. 1435 000Z10001
	EDV No. 88092764
	Description : GEMU Electro Pneumatic Positioner Type 1435
	Air Supply : Max. 6 bar
	Output Signal: 0-10V, optional 4-20mAA
	Input Signal : 0/4-20mA, 0-10V
	Voltage Supply : 24V DC
	Action : Single acting
Gemu Vietnam	DN 10-20mm
	600 10M52
	Description : GEMU Spare Working Diaphragm
	Diaphragm M : EPDM/PTFE
	XCKJ10511
	DPS_20R Push-Pull force gauge
	The model 9800 is discontinued and is replaced by RX-20, see attached
	1. BHI62ET-7.5 Induction Motor
	2. BHI62E-7.5 Induction Motor
	8.5868.1231.3112
	D8.4C1.0600.6324.G321
Gemu Vietnam	673 25D1834170S1500
	DN 25mm
	Description : GEMU Metal Diaphragm Valve, Manually Operated
	Conneciton : Spigots DIN 11850, series 3
	Body Material : 1.4435 (316L) Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Manually Operated
	Surface Finishing : Ra <= 6.3 μm blasted internal/external
	Working Pressure : Max 10 bar
	Temperature : Max 150°C
Gemu Vietnam	673 32D1834170S1500
	DN 32mm
	Description : GEMU Metal Diaphragm Valve, Manually Operated
	Conneciton : Spigots DIN 11850, series 3
	Body Material : 1.4435 (316L) Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Manually Operated
	Surface Finishing : Ra <= 6.3 μm blasted internal/external
	Working Pressure : Max 10 bar
	Temperature : Max 150°C
Gemu Vietnam	540 15D 1 37 5 1 1 (88051957) _ DN 15 mm
	(540-15D-1-37-5-1-1 / 54015D137511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 540
	Connection : Threaded sockets DIN ISO 228
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 25 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	554 40D 60 37 5 1 1 (88211296) _ DN 40 mm
	(554-40D-60-37-5-1-1 / 55440D6037511)
	Description : GEMU 2/2 Way Metal Globe Valve Type 554
	Connection : Spigots EN ISO 1127
	Body material : 1.4408 Stainless Steel
	Diaphragm material : PTFE
	Control Function : Normally Closed
	Working Pressure : Max 4.5 bar
	Woking Temperatur : Max 180°C
Gemu Vietnam	GEMU Spare Actuator Type 9625
	(actuator come with optical position indicator)
	DN 10-20
	9625 10D 1 1/N
	(EDV: 88027274)
Gemu Vietnam	GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit)
	Action  : Single Acting
	Air Supply  : Max 6 bar
	Output Signal : 0-10V  Input Signal : 0-20mA ,  4-20mA ,  0-10V
	Voltage : 24V DC
	Version : Electro-pneumatic 4-20mA, 90 l/min
	Part No: 1435000Z10002
Gemu Vietnam	Part No: 334 1M142541C1010010
	Description : GEMU Plastic Pilot Valve, Directly Controlled Type 334
	Valve Size : DN 1mm
	Connection  : Threaded sockets DIN ISO 228
	Body Materi
	a : PBT, Polybutylene terephthalate
	Seal Material : FPM
	Control Function : Normally Closed
	Voltage : 24V DC
Gemu Vietnam	Part No: 610 12D1152 1 1/N
	GEMU Plastic Diaphragm Valve, Pneumatically Operated Type 610
	Valve Size : DN 12mm
	Connection  : Threaded sockets DIN ISO 228
	Body Materi
	a : PVC-U, grey
	Diaphragm Material : PTFE/EPDM
	Control Function : Normally Closed
Gemu Vietnam	Part No: 1215000Z1546
	GEMU Electrical Position Indicator ATEX
	Feedback : Single pole double throw contact,microswitches
Gemu Vietnam	GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit)
Gemu Vietnam	417 50D7.1.14.0
	(EDV, 88012869)
	DN 50mm
	41750D71140
Gemu Vietnam	GEMU Plastic Pilot Valve, Directly Controlled Type 0322
	0322 2M17441C1010010
	(EDV, 88318741)
	DN 2mm
	Description : 3/2 way plastic pilot valve, directly controlled
	Connection : Threaded sockets DIN ISO 228
	Body material : PA, Polyamide
	Seal Material : FPM
	Control Function : Normally Closed
	Voltage : 24V DC
	Electrical Connection : Plug with cable socket, without cable
	Working Pressure : Max. 10 ba
	Note: confirm lai type cua valve truoc khi dat hang
Gemu Vietnam	GEMU Electro-Pneumatic Positioner Type 1435
	PartNo. 1435000Z30201
	(4-20mA actual value output)
	(Electro-pneumatic 4-0mA, 50 I/min)
	(100% exact for this PN.)
	EDV No. 88203371 instead of 88092764
	Description : GEMU Electro Pneumatic Positioner Type 1435
	Air Supply : Max. 6 bar
	Output Signal: 0-10V, optional 4-20mAA
	Input Signal : 0/4-20mA, 0-10V
	Voltage Supply : 24V DC
	Action : Single acting
	(without Mounting Kit)
Gemu Vietnam	817 20D33 21 14 146 250
	Media : Water at 20°C
	Range : 20 - 250 L/hr
	Description : GEMU Plastic Flowmeter Type 817
	Tube Conneciton : Union ends with inch insert (socket)
	Tube Materi : PA, Polyamide transparent
	O-Ring Material : EPDM
	Connection Material : PVC-U, grey
	Media : Water at 20°C
	* (For more details please check attached data sheet)
Gemu Vietnam	817 20D33 21 14 148 640
	Media : Water at 20°C
	Range : 60 - 640 L/hr
	Description : GEMU Plastic Flowmeter Type 817
	Tube Conneciton : Union ends with inch insert (socket)
	Tube Materi : PA, Polyamide transparent
	O-Ring Material : EPDM
	Connection Material : PVC-U, grey
	Media : Water at 20°C
	* (For more details please check attached data sheet)
Gemu Vietnam	640 25D 1 37 12 1 1 (EDV 88052017)
	(64025D1371211 - 640 25D137121 1)
	DN 25mm
	Description : GEMU Metal Diaphragm Valve, Pneumatically Operated
	Conneciton : G 1"
	Body Materia : 1.4408 Stainless Steel
	Diaphragm Material : EPDM
	Control Function : Noramlly Closed
	Working Pressure : Max 10 bar
	Temperature : Max 130°C
Gemu Vietnam	GEMU Metal Diaphragm Valve, Pneumatically Operated Type 615
	615 15D60.34.52.1.1/N.1508
	DN 15mm
	(615-15D-60-34-52-1-1/N-1508)
	Description : GEMU Metal Diaphragm Valve, Pneumatically Operated
	Conneciton : Spigots DIN std
	Body Material : 1.4435 (316L) Stainless Steel
	Diaphragm Material : PTFE/EPDM
	Control Function : Normally Closed
	Surface Finishing : Ra <= 0.6 electropolished internal/external
	Working Pressure : Max 6 bar
	Temperature : Max 150°C
Gemu Vietnam	WZ 3.1B Material Analysis Inspection Certificate
	88039444
Gemu Vietnam	WZ 2.2 Pressure Test
	General confirmation of pressure test with
	max. 6 bar air. Only possible with assembled valve
	88039443
Gemu Vietnam	WZ 2.2 Measurement of surface finishing
	General confirmation that surface finish
	specifications have been adhered to and
	indication of tst conditions
	88079146
Gemu Vietnam	VEGA Germany
	VEGASON 64
	code: SON64.XXAEPVDMXX
	Liquids: 1..25m. Solid :
Gemu Vietnam	600 10M52 (88026752) _ 60010M52
	Description : GEMU Spare Working Diaphragm
	Diaphragm Material : PTFE/EPDM
	For Valve Size: DN 10-15
	(Valve: 61515D6034523 (size) =15
	Diaphragm material = PTFE/EPDM
	Diaphragm material code =52)