Công ty TNHH TM-DV Lâm Gia Phú là đại lý chính thức phân phối van GEMÜ tại Việt Nam
Địa chỉ: 1389/7 Phan Văn Trị, Phường 10, Quận Gò Vấp, Tp.HCM
Tel: 08 3588 0828 Fax: 08 3588 0829
http://cokhicongnghiep.mov.mn/
http://cokhicongnghiep.mov.mn/
Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com
.jpg)
GEMÜ là một trong những nhà sản xuất hàng đầu của hệ thống van, đo lường và điều khiển, và là người lãnh đạo thị trường thế giới của các van cho các ứng dụng vô trùng trong các ngành công nghiệp dược phẩm và công nghệ sinh học. Vị trí này đã đạt được sau đầu tư toàn diện GEMÜ trong nghiên cứu và phát triển ứng dụng cụ thể, chiếm hơn 5% doanh thu của công ty.
Mức độ đổi mới gắn liền với vị trí - Đức được coi là một quốc gia trên toàn cầu của các kỹ sư. GEMÜ trên bảng xếp hạng của 1.000 nhà lãnh đạo thị trường toàn cầu Đức hàng đầu. GEMÜ trụ sở chính tại khu vực đó là nơi có mật độ cao nhất của các nhà lãnh đạo thị trường toàn cầu, khu vực Heilbronn-Franken tại Baden-Württemberg. Thành công quốc tế của GEMÜ chủ yếu dựa vào các doanh nghiệp và tinh thần tiên phong của Fritz Müller, người đã phát triển quá trình van nhựa đầu tiên của thế giới trong năm 1963 van điện từ điều khiển trực tiếp Đây là điểm khởi đầu cho nền tảng của GEMÜ năm đó.
Hãy liên hệ với công ty TNHH TM-DV Lâm Gia Phú để được hỗ trợ giá tốt nhất cùng với dịch vụ tư vấn và hỗ trợ lắp đặt miễn phí sản phẩm Van GEMÜ
Thông tin liên hệ: Ms Hiền - 0902 50 30 80 - Email:hien@lamgiaphu.com
| Gemu Vietnam valves | JWB-X0.75B-40D |
| Gemu Vietnam valves | JWB-X0.55B-13D |
| Gemu Vietnam valves | JWB-X0.75B-13D |
| Gemu Vietnam valves | Part No: 667 40D33.1.14 2 |
| Gemu Vietnam valves | Part No: 667 25D33.1.14 2 |
| Gemu Vietnam valves | Part No:600 10M52 (88026752) |
| Gemu Vietnam valves | |
| Gemu Vietnam | 600 25M5E |
| (EDV: 88076835) | |
| DN 15-25 (MG25) | |
| Gemu Vietnam | 514 25D 19511 2061 |
| DN25mm | |
| Gemu Vietnam | 514 40D 19511 2061 |
| DN40mm | |
| Max. 4.5 bar | |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 514 20D 19511 2061 |
| DN20mm | |
| Gemu Vietnam | 514 50D 19511 2061 |
| DN50mm | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 88026752) | |
| size: DN10-20 (MG10) | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 8826752) | |
| DN10-20mm | |
| Gemu Vietnam | 600 10M13 |
| (EDV: 88037819) | |
| DN10-20mm | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 88026752) | |
| size: DN10-20 (MG10) | |
| Gemu Vietnam | 600 25M5E |
| (EDV: 88076835) | |
| DN 15-25 (MG25) | |
| Gemu Vietnam | 514 25D 19511 2061 |
| DN25mm | |
| Gemu Vietnam | 514 40D 19511 2061 |
| DN40mm | |
| Max. 4.5 bar | |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 514 20D 19511 2061 |
| DN20mm | |
| Gemu Vietnam | 514 50D 19511 2061 |
| DN50mm | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam Gemu Vietnam Spare Actuator | 9615 10D 3 1/N |
| Edv No. 88027266 | |
| DN 10 - 15mm | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | IG KU 5V TTL 4096 |
| D=12 5820 1,5M | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | D-74653 52 4D 12014124 50/60 PS 3-0BAR 50/60HZ 24V 6WI-DE-8800027 5-00-3080547 |
| Gemu Vietnam China | JWB-X0.75B-40D |
| Gemu Vietnam China | JWB-X0.55B-13D |
| Gemu Vietnam China | JWB-X0.75B-13D |
| Gemu Vietnam Description : Gemu Vietnam Spare Working Diaphragm | 600 25M52 |
| Diaphragm Material : PTFE/EPDM | (EDV: 88015145) |
| DN15-25mm | |
| Gemu Vietnam Gemu Vietnam Spare Working Diaphragm | 600 25M13 |
| Diaphragm Material : EPDM | (EDV: 88037767) |
| DN15-25mm | |
| Gemu Vietnam Limit Switch | Part No: 1252000Z00000 |
| EDV No:88029063 | |
| Gemu Vietnam Plastic Flowmeter | 807R25D72114 155 1600 |
| (EDV: 88044984) | |
| DN 25mm | |
| Gemu Vietnam Pneumatic Controller | 1435000Z30201 |
| Gemu Vietnam Pneumatic Positioner | Part no. 1435000Z30201 |
| Gemu Vietnam singapore | 61220D84C1520S1507 |
| Gemu Vietnam singapore | Part No:600 10M52 (88026752) |
| Gemu Vietnam singapore | GEMU 2/2 way plastic solenoid valve Type 225 |
| Description:GEMU 2/2 way plastic solenoid valve Type 225 | |
| Connection:Spigots DIN | |
| Body material:PVC | |
| Seal material:EPDM | |
| Control Function:Normally Closed | |
| Supply Voltage:230 V | |
| Working Pressure:0 - 6 bar | |
| Gemu Vietnam singapore | Part No: 667 40D33.1.14 2 |
| DN 40mm | |
| Add on: 130000023 | |
| Gemu Vietnam singapore | Part No: 667 25D33.1.14 2 |
| DN 25mm | |
| Add on: 130000022 | |
| Gemu Vietnam Singapore | Description:GEMU 2/2 way plastic diaphragm valve Type 667 |
| Connection:Union ends with inch insert (socket) | |
| Body material:PVC | |
| Seal material:EPDM | |
| Control Function:Normally Open | |
| Working Pressure:0 - 10 bar | |
| Equip with:Gemu Optical Position Indicator Type 1300 | |
| Size: DN 40mm | |
| Part No: 667 50D33.1.14 2 | |
| EDV: 88039635 | |
| Add on：130000024 | |
| EDV：88035004 | |
| Gemu Vietnam Singapore | Description: GEMU 2/2 way plastic diaphragm valve Type 607 |
| Connection: Spigots DIN | |
| Body material : PVC | |
| Seal material: EPDM | |
| Control Function: Manually Operated | |
| Come with:Seal Adjuster , black handwheel | |
| Part No：607 10E013A 0 S | |
| EDV: 88044358 | |
| Gemu Vietnam Singapore | Description:GEMU Flowmeter Type 855 |
| Float material:PP | |
| Tube material:PSU, Polysulphone | |
| O-ring material:EPDM | |
| Union material:PVC | |
| Connection:Union end with DIN insert/socket | |
| Media:Water at 20deg C | |
| Flowrange:40-400 l/hr | |
| Valve Size: DN 20 mm | |
| Part No: 855 20D7.22.14.1 33 400 | |
| EDV: 88014591 | |
| Gemu Vietnam Singapore | Limit Switch Type 1252 |
| Output Signal:1 reed contact bistable, min.-contact | |
| Part No: 1252000Z00000 | |
| (EDV: 88029063) | |
| Gemu Vietnam Singapore | Plastic Diaphragm Valve Type 600 |
| Connection:Union ends with DIN insert (for IR butt welding) | |
| Body material:PP | |
| Diaphragm material:EPDM | |
| Control Function:Normally Closed | |
| Working Pressure:Max. 10 bar | |
| Working Temperature:5°C to 80°C | |
| Part No: 600 25D7871141 2/N | |
| (EDV: 88072224) | |
| Valve Size: DN 25mm | |
| Gemu Vietnam Singapore | GEMU 2/2 way plastic diaphragm valve Type 690 |
| Connection: Union ends with DIN insert (socket) | |
| Body material:PVC | |
| Seal material:EPDM | |
| Control Function:Normally Closed | |
| Working Pressure :0 - 10 bar | |
| Equip with:Gemu Optical Position Indicator Type 1300 | |
| Part No.: 690 40D7.1.14.1 2/N | |
| Add on: 1300000Z13 | |
| Gemu Vietnam Singapore | Type 9625 |
| Part No: 9625 10D 1 1/N | |
| (EDV: 88027274) | |
| Gemu Vietnam Singapore | 8506 6M11421 24V DC |
| (EDV: 88046910) | |
| Description : GEMU Metal Solenoid Valve (NAMUR) | |
| Connection : Threaded sockets G 1/4 | |
| Body Material : Aluminium (AI) | |
| Seal Material : Perbunan (NBR) | |
| Voltage : 24V DC | |
| Working Pressure : 2 - 8 bar | |
| Working Temperature : -10°C to +50°C | |
| Gemu Vietnam Singapore | Description : GEMU Electro-Pneumatic Positioner Type 1435 |
| (Without explosion proof rating) | |
| Housing Material : Aluminium coated | |
| Air Supply : Max. 6 bar | |
| Voltage : 24V DC | |
| Version : Electro-pneumatic 4-20mA, 90 l/min | |
| Function : Single Acting | |
| Part No: 1435000Z10002 | |
| Gemu Vietnam Singapore | Description : GEMU plastic pilot valve, directly controlled type 334 |
| Connection : Threaded sockets DIN ISO 228, hollow bolt G 1/8 | |
| Body Material : PBT, polybutylene terephthalate | |
| Seal Material : FPM | |
| Control Function : Normally Closed | |
| Voltage : 24V DC | |
| Electrical Connection : Plug type A with cable socket, without cable | |
| Working Pressure : Max 10 bar | |
| Part No: 334 1M182541C1010010 | |
| (EDV: 88045712) | |
| Gemu Vietnam Singapore | Description:GEMU plastic pilot valve, directly controlled type 334 |
| Connection:Threaded sockets DIN ISO 228, hollow bolt G 1/4 | |
| Body Material:PBT, polybutylene terephthalate | |
| Seal Material:FPM | |
| Control Function:Normally Closed | |
| Voltage:24V DC | |
| Electrical Connection:Plug type A with cable socket, without cable | |
| Working Pressure:Max 10 bar | |
| Part No:334 1M142541C1010010 | |
| (EDV: 88045711) | |
| Gemu Vietnam Singapore | 855 25D33.3.14.1.44.900 |
| (EDV: 88282002) | |
| Gemu Vietnam Singapore | 855 25D33.21.14.1.44.260 |
| (EDV: 88036736) | |
| Gemu Vietnam Singapore | 1215000Z1546 |
| (EDV: 88046211) | |
| Gemu Vietnam Singapore | 1435000Z10001 |
| (EDV: 88092764) | |
| Gemu Vietnam Singapore | 610 12D1.1.52.1 1/N |
| Gemu Vietnam singapore | Part No: 225 25D0.1.14.1 230 50/60 |
| Size: DN 25 | |
| Gemu Vietnam singapore | 61220D84C1520S1507 |
| Gemu Vietnam singapore | Part No:600 10M52 (88026752) |
| Gemu Vietnam singapore | Part No: 667 40D33.1.14 2 |
| DN 40mm | |
| Add on: 130000023 | |
| Gemu Vietnam singapore | Part No: 667 25D33.1.14 2 |
| DN 25mm | |
| Add on: 130000022 | |
| Gemu Vietnam Singapore | Description:GEMU 2/2 way plastic diaphragm valve Type 667 |
| Connection:Union ends with inch insert (socket) | |
| Body material:PVC | |
| Seal material:EPDM | |
| Control Function:Normally Open | |
| Working Pressure:0 - 10 bar | |
| Equip with:Gemu Optical Position Indicator Type 1300 | |
| Size: DN 40mm | |
| Part No: 667 50D33.1.14 2 | |
| EDV: 88039635 | |
| Add on：130000024 | |
| EDV：88035004 | |
| Gemu Vietnam Singapore | Description: GEMU 2/2 way plastic diaphragm valve Type 607 |
| Connection: Spigots DIN | |
| Body material : PVC | |
| Seal material: EPDM | |
| Control Function: Manually Operated | |
| Come with:Seal Adjuster , black handwheel | |
| Part No：607 10E013A 0 S | |
| EDV: 88044358 | |
| Gemu Vietnam Singapore | Description:GEMU Flowmeter Type 855 |
| Float material:PP | |
| Tube material:PSU, Polysulphone | |
| O-ring material:EPDM | |
| Union material:PVC | |
| Connection:Union end with DIN insert/socket | |
| Media:Water at 20deg C | |
| Flowrange:40-400 l/hr | |
| Valve Size: DN 20 mm | |
| Part No: 855 20D7.22.14.1 33 400 | |
| EDV: 88014591 | |
| Gemu Vietnam Singapore | Limit Switch Type 1252 |
| Output Signal:1 reed contact bistable, min.-contact | |
| Part No: 1252000Z00000 | |
| (EDV: 88029063) | |
| Gemu Vietnam Singapore | Plastic Diaphragm Valve Type 600 |
| Connection:Union ends with DIN insert (for IR butt welding) | |
| Body material:PP | |
| Diaphragm material:EPDM | |
| Control Function:Normally Closed | |
| Working Pressure:Max. 10 bar | |
| Working Temperature:5°C to 80°C | |
| Part No: 600 25D7871141 2/N | |
| (EDV: 88072224) | |
| Valve Size: DN 25mm | |
| Gemu Vietnam Singapore | GEMU 2/2 way plastic diaphragm valve Type 690 |
| Connection: Union ends with DIN insert (socket) | |
| Body material:PVC | |
| Seal material:EPDM | |
| Control Function:Normally Closed | |
| Working Pressure :0 - 10 bar | |
| Equip with:Gemu Optical Position Indicator Type 1300 | |
| Part No.: 690 40D7.1.14.1 2/N | |
| Add on: 1300000Z13 | |
| Gemu Vietnam Singapore | Type 9625 |
| Part No: 9625 10D 1 1/N | |
| (EDV: 88027274) | |
| Gemu Vietnam Singapore | 8506 6M11421 24V DC |
| (EDV: 88046910) | |
| Description : GEMU Metal Solenoid Valve (NAMUR) | |
| Connection : Threaded sockets G 1/4 | |
| Body Material : Aluminium (AI) | |
| Seal Material : Perbunan (NBR) | |
| Voltage : 24V DC | |
| Working Pressure : 2 - 8 bar | |
| Working Temperature : -10°C to +50°C | |
| Gemu Vietnam Singapore | Description : GEMU Electro-Pneumatic Positioner Type 1435 |
| (Without explosion proof rating) | |
| Housing Material : Aluminium coated | |
| Air Supply : Max. 6 bar | |
| Voltage : 24V DC | |
| Version : Electro-pneumatic 4-20mA, 90 l/min | |
| Function : Single Acting | |
| Part No: 1435000Z10002 | |
| Gemu Vietnam Singapore | Description : GEMU plastic pilot valve, directly controlled type 334 |
| Connection : Threaded sockets DIN ISO 228, hollow bolt G 1/8 | |
| Body Material : PBT, polybutylene terephthalate | |
| Seal Material : FPM | |
| Control Function : Normally Closed | |
| Voltage : 24V DC | |
| Electrical Connection : Plug type A with cable socket, without cable | |
| Working Pressure : Max 10 bar | |
| Part No: 334 1M182541C1010010 | |
| (EDV: 88045712) | |
| Gemu Vietnam Singapore | Description:GEMU plastic pilot valve, directly controlled type 334 |
| Connection:Threaded sockets DIN ISO 228, hollow bolt G 1/4 | |
| Body Material:PBT, polybutylene terephthalate | |
| Seal Material:FPM | |
| Control Function:Normally Closed | |
| Voltage:24V DC | |
| Electrical Connection:Plug type A with cable socket, without cable | |
| Working Pressure:Max 10 bar | |
| Part No:334 1M142541C1010010 | |
| (EDV: 88045711) | |
| Gemu Vietnam Singapore | 855 25D33.3.14.1.44.900 |
| (EDV: 88282002) | |
| Gemu Vietnam Singapore | 855 25D33.21.14.1.44.260 |
| (EDV: 88036736) | |
| Gemu Vietnam valves | Part No:600 10M52 (88026752) |
| Gemu Vietnam | VEGA Germany |
| Gemu Vietnam | 600 32D78 71 14 1 3/N |
| Gemu Vietnam | 1230000ZA021031101101 |
| Gemu Vietnam | 1435000Z10002 (1435000Z10002-0 not correct) |
| Gemu Vietnam | 667 40D33.1.14.2 |
| Gemu Vietnam | 667 25D33.1.14.2 |
| Gemu Vietnam | * SOLENOID : |
| Gemu Vietnam | 514 65D1.37.5-1-2 2061 (88047034) |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 (88011313) |
| Gemu Vietnam | DN 65 mm 514 65D1.37.5-1-2 2061 (88047034) |
| Gemu Vietnam | Solenoid Valve |
| Gemu Vietnam | Diaphragm Valve: |
| Gemu Vietnam | DN 25mm |
| Gemu Vietnam | DN 50mm |
| Gemu Vietnam | Description : GEMU Electro-Pneumatic Positioner 1435 (without Mounting Kit) |
| Gemu Vietnam | GEMU Spare Actuator Type 9625 |
| Gemu Vietnam | GEMU Metal Solenoid Valve (NAMUR) |
| Gemu Vietnam | 417 50D7.1.14.0 |
| Gemu Vietnam | GEMU Plastic Pilot Valve, Directly Controlled Type 0322 |
| Gemu Vietnam | 673 25D1834170S1500 |
| Gemu Vietnam | 673 32D1834170S1500 |
| Gemu Vietnam | JWB-X0.75B-40D |
| Gemu Vietnam | JWB-X0.55B-13D |
| Gemu Vietnam | JWB-X0.75B-13D |
| Gemu Vietnam | 1435000Z10001 |
| -88092764 | |
| Gemu Vietnam | 1435000Z10002 |
| -88096051 | |
| Gemu Vietnam | 1252000Z00000 |
| (EDV: 88029063) | |
| Gemu Vietnam | 1251000Z00000 |
| (EDV: 88029062) | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Type: 52 4D1151 24DC U (EDV:88000238) |
| Gemu Vietnam | 554 15D31C151 0 (EDV: 88320057) |
| Equip with 1300000Z04 (EDV: 88004333) | |
| Gemu Vietnam | SC0300U 6 F07F10NS22A 126Nm 206Nm 6bar SU30KD0 |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 |
| (EDV: 88011313) | |
| DN 50mm | |
| Equip with: 1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 520 80D39.8.5.1.3/3 |
| (EDV: 88031662) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 9520 80Z8.5.1.3/3 |
| (EDV: 88240731) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 512 50D39.8.5.1.2 |
| (EDV: 88032056) | |
| DN 50mm | |
| Equip with:1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 9512 50Z8.5.1.2 |
| (EDV: 88027458) | |
| DN 50mm | |
| Equip with: 1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 334 1M182541C1010010 |
| (EDV: 88045712) | |
| DN 1mm | |
| Gemu Vietnam | 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC | |
| Gemu Vietnam | 88214090 8258 40D 112 21 24 DC |
| Gemu Vietnam | 687 25D373413 3 1/N 1 |
| (EDV: 88290803) | |
| DN 25mm | |
| Equip with: | |
| 1300000Z13 | |
| (EDV: 88004337) | |
| Gemu Vietnam | 600 25M13 |
| (EDV: 88037767) | |
| DN 15-25mm | |
| Gemu Vietnam | 8258 32D11221 230 50 |
| (EDV: 88204157) | |
| DN 32mm | |
| Gemu Vietnam | 514 32D13751 4 |
| (EDV# 88012582) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C10 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
| Gemu Vietnam | 0324 2M1474 41L40 |
| Voltage: 230V AC (50/60Hz) | |
| (EDV# 88318769) | |
| DN 2mm | |
| Gemu Vietnam | 514 50D13751 4 |
| (EDV: 88012583) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 835 25D72214 153 |
| (EDV: 88084330) | |
| DN 25mm | |
| Gemu Vietnam | 815 32D72214 162 |
| (EDV: 88084504) | |
| DN 32mm | |
| Gemu Vietnam | 4232000Z1407500M50000 |
| -88201482 | |
| Gemu Vietnam | JWB-X0.75B-40D |
| Gemu Vietnam | JWB-X0.55B-13D |
| Gemu Vietnam | JWB-X0.75B-13D |
| Gemu Vietnam | 618 15D1.12.4.C4.AP.6442 AO |
| (EDV 88041354) | |
| DN 15mm | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 8826752) | |
| DN10-20mm | |
| Gemu Vietnam | 600 10M13 |
| (EDV: 88037819) | |
| DN10-20mm | |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| Max. 9 bar | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 688 25D87405E11V1 1502 |
| DN 25mm | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | Type: 52 4D1151 24DC U (EDV:88000238) |
| Gemu Vietnam | 554 15D31C151 0 (EDV: 88320057) |
| Equip with 1300000Z04 (EDV: 88004333) | |
| Gemu Vietnam | SC0300U 6 F07F10NS22A 126Nm 206Nm 6bar SU30KD0 |
| Gemu Vietnam | 514 50D1.37.5-1-2 2061 |
| (EDV: 88011313) | |
| DN 50mm | |
| Equip with: 1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 520 80D39.8.5.1.3/3 |
| (EDV: 88031662) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 9520 80Z8.5.1.3/3 |
| (EDV: 88240731) | |
| DN 80mm | |
| Equip with:1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 512 50D39.8.5.1.2 |
| (EDV: 88032056) | |
| DN 50mm | |
| Equip with:1300000Z06 | |
| (EDV: 88004334) | |
| Gemu Vietnam | 9512 50Z8.5.1.2 |
| (EDV: 88027458) | |
| DN 50mm | |
| Equip with: 1300000Z17 | |
| (EDV: 88004341) | |
| Gemu Vietnam | 334 1M182541C1010010 |
| (EDV: 88045712) | |
| DN 1mm | |
| Gemu Vietnam | 8258000P9101 |
| Spare coil for P/N : 8258 40D1.12.2.1 24V DC | |
| Gemu Vietnam | 88214090 8258 40D 112 21 24 DC |
| Gemu Vietnam | 687 25D373413 3 1/N 1 |
| (EDV: 88290803) | |
| DN 25mm | |
| Equip with: | |
| 1300000Z13 | |
| (EDV: 88004337) | |
| Gemu Vietnam | 600 25M13 |
| (EDV: 88037767) | |
| DN 15-25mm | |
| Gemu Vietnam | 8258 32D11221 230 50 |
| (EDV: 88204157) | |
| DN 32mm | |
| Gemu Vietnam | 514 32D13751 4 |
| (EDV# 88012582) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C10 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
| Gemu Vietnam | 0324 2M1474 41L40 |
| Voltage: 230V AC (50/60Hz) | |
| (EDV# 88318769) | |
| DN 2mm | |
| Gemu Vietnam | 514 50D13751 4 |
| (EDV: 88012583) | |
| equipped 1300000Z38 | |
| (EDV# 88261439) | |
| DN 50mm | |
| Gemu Vietnam | 835 25D72214 153 |
| (EDV: 88084330) | |
| DN 25mm | |
| Gemu Vietnam | 815 32D72214 162 |
| (EDV: 88084504) | |
| DN 32mm | |
| Gemu Vietnam | GEMU Electro-Pneumatic Positioner Type 1435 |
| Gemu Vietnam | 817 20D33 21 14 146 250 |
| Gemu Vietnam | 817 20D33 21 14 148 640 |
| Gemu Vietnam | 640 25D 1 37 12 1 1 (EDV 88052017) |
| Gemu Vietnam | 600 10M52 (88026752) _ 60010M52 |
| Gemu Vietnam | (61220D59.34.17.0.S.1500) |
| Gemu Vietnam | GEMU Metal Diaphragm Valve, Pneumatically Operated Type 615 |
| Gemu Vietnam | WZ 3.1B Material Analysis Inspection Certificate |
| Gemu Vietnam | WZ 2.2 Pressure Test |
| Gemu Vietnam | WZ 2.2 Measurement of surface finishing |
| Gemu Vietnam | 600 10M13 |
| (EDV: 88037819) | |
| DN10-20mm | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 88026752) | |
| size: DN10-20 (MG10) | |
| Gemu Vietnam | 600 25M5E |
| (EDV: 88076835) | |
| DN 15-25 (MG25) | |
| Gemu Vietnam | 514 25D 19511 2061 |
| DN25mm | |
| Gemu Vietnam | 514 40D 19511 2061 |
| DN40mm | |
| Max. 4.5 bar | |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 514 20D 19511 2061 |
| DN20mm | |
| Gemu Vietnam | 514 50D 19511 2061 |
| DN50mm | |
| Gemu Vietnam | 600 25D7871141 2/N |
| (EDV: 88072224) | |
| DN 25mm | |
| Gemu Vietnam | 514 50D 1 37 5 1 5 |
| (EDV: 88039357) | |
| equipped | |
| 1300000Z06 | |
| (EDV: 88004334) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C1010210 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
| Gemu Vietnam | 0324 2M1474 41L4010210 |
| Voltage: 230V AC (50/60Hz) | |
| (EDV# 88318769) | |
| DN 2mm | |
| Gemu Vietnam | 688 25D87405E11V1 1502 |
| DN 25mm | |
| Gemu Vietnam | 8258-32-D-31-37-2-1-24-DC |
| Gemu Vietnam | 8253 25D 31 37 2 1 24DC |
| DN 25mm | |
| Gemu Vietnam | DN 50mm |
| 667 50D71145 | |
| (EDV: 88050362) | |
| Gemu Vietnam | R690 50D 7 1 14 2 HDN |
| (EDV: 88365093) | |
| DN 50mm | |
| Gemu Vietnam | 618 15D1.12.4.C4.AP.6442 AO |
| (EDV 88041354) | |
| DN 15mm | |
| Gemu Vietnam | 807R50D72114 173 10000 |
| (EDV: 88002862) | |
| DN 50mm | |
| Gemu Vietnam | 554 15D31 37 30 1 B |
| (EDV: 88372189) | |
| DN 15mm | |
| Gemu Vietnam | WZ 3.1B Body Material Analysis Inspection Certificate |
| 88039444 | |
| Gemu Vietnam | WZ 2.2 Pressure Test |
| 88039443 | |
| Gemu Vietnam | 554 15D6037510 |
| (EDV: 88208952) | |
| 1300000Z04 | |
| (EDV: 88004333) | |
| DN 15mm | |
| Gemu Vietnam | Limit Switch |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| Max. 9 bar | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 807R50D72114 173 10000 |
| (EDV: 88002862) | |
| DN 50mm | |
| Gemu Vietnam | GEMU Spare Actuator |
| Gemu Vietnam | Plastic Flowmeter |
| Gemu Vietnam | 554 15D31 37 30 1 B |
| (EDV: 88372189) | |
| DN 15mm | |
| Gemu Vietnam | 618 15D1.12.4.C4.AP.6442 AO |
| (EDV 88041354) | |
| DN 15mm | |
| Gemu Vietnam | 600 25M13 |
| (EDV: 88037767) | |
| DN15-25mm | |
| Gemu Vietnam | 600 25M52 |
| (EDV: 88015145) | |
| DN15-25mm | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 8826752) | |
| DN10-20mm | |
| Gemu Vietnam | 600 10M13 |
| (EDV: 88037819) | |
| DN10-20mm | |
| Gemu Vietnam | Part no: 1435000Z10002 |
| EDV No: 88096051 | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 88026752) | |
| size: DN10-20 (MG10) | |
| Gemu Vietnam | 600 25M5E |
| (EDV: 88076835) | |
| DN 15-25 (MG25) | |
| Gemu Vietnam | 514 25D 19511 2061 |
| DN25mm | |
| Gemu Vietnam | 514 40D 19511 2061 |
| DN40mm | |
| Max. 4.5 bar | |
| Gemu Vietnam | 514 40D 19515 2061 |
| DN40mm | |
| Max. 9 bar | |
| 4.0 - 8 bar | |
| Gemu Vietnam | 514 20D 19511 2061 |
| DN20mm | |
| Gemu Vietnam | 514 50D 19511 2061 |
| DN50mm | |
| Gemu Vietnam | 600 25D7871141 2/N |
| (EDV: 88072224) | |
| DN 25mm | |
| Gemu Vietnam | 514 50D 1 37 5 1 5 |
| (EDV: 88039357) | |
| equipped | |
| 1300000Z06 | |
| (EDV: 88004334) | |
| DN 50mm | |
| Gemu Vietnam | 0324 2M1474 41C1010210 |
| Voltage: 24V DC | |
| (EDV# 88322110) | |
| DN 2mm | |
| Gemu Vietnam | 0324 2M1474 41L4010210 |
| Voltage: 230V AC (50/60Hz) | |
| (EDV# 88318769) | |
| DN 2mm | |
| Gemu Vietnam | 688 25D87405E11V1 1502 |
| DN 25mm | |
| Gemu Vietnam | 8258-32-D-31-37-2-1-24-DC |
| Gemu Vietnam | 8253 25D 31 37 2 1 24DC |
| DN 25mm | |
| Gemu Vietnam | DN 50mm |
| 667 50D71145 | |
| (EDV: 88050362) | |
| Gemu Vietnam | R690 50D 7 1 14 2 HDN |
| (EDV: 88365093) | |
| DN 50mm | |
| Gemu Vietnam | 1230000ZA001031101101 |
| Gemu Vietnam | DN15-25 |
| 600 25M13 (EDV: 88037767) | |
| Diaphragm Material : EPDM | |
| Gemu Vietnam | Part no:1435000Z30201 |
| Gemu Vietnam | Part no:1435000Z30201 |
| Gemu Vietnam | 615 15D60345231/N 1509 |
| (EDV: 88209013) | |
| Gemu Vietnam | 8253 25D13721 230 50/60 |
| (EDV: 88299445) | |
| Gemu Vietnam | 600 10M52 |
| (EDV: 8826752) | |
| DN10-20mm |
Không có nhận xét nào:
Đăng nhận xét